Industries We Serve in Ohio

Training Built for Ohio’s Most Demanding Electrical Environments

Every industry sector in Ohio carries its own electrical hazard profile. We build curriculum around the specific equipment, voltage levels, and classified locations your workers encounter every day.

Oil & Gas Operations

Ohio’s Utica Shale play in the eastern part of the state, centered on Belmont, Guernsey, and Harrison counties, involves wellhead electrical systems, gas processing and compression stations, and hazardous (classified) locations under NEC Article 500.

Petrochemical & Refining

Ohio’s Toledo-area refining operations and the state’s substantial polymer and plastics manufacturing base run 480V to 15kV distribution systems with large rotating equipment. Arc flash incident energy levels in refinery and polymer plant switchgear rooms routinely require rigorous hazard analysis.

Construction & Utilities

Ohio’s aggressive data center and semiconductor fab construction boom in the Columbus region, alongside AEP and FirstEnergy transmission infrastructure, creates unique 2027 NFPA 70E/OSHA 29 CFR 1926 Subpart K intersections for electrical contractors.

Municipalities & Public Utilities

Municipal utilities and water/wastewater treatment facilities across Ohio’s many mid-size cities require training on switchgear up to 15kV, transformer maintenance, and OSHA 29 CFR 1910.269 compliance alongside 2027 NFPA 70E.

Data Centers

The Columbus region has become one of the fastest-growing hyperscale data center markets in the United States, with major campuses and a large semiconductor fab investment in Licking County. These facilities operate critical UPS systems, 480V bus duct, and generator switchgear requiring trained qualified electrical workers for energized electrical work permits.

Manufacturing

Ohio’s deep manufacturing base — automotive assembly, specialty steel, and aerospace component production — runs complex 480V and 4.16kV distribution systems where arc flash studies and qualified worker training are required under the OSHA General Duty Clause.

Regulatory Context

Ohio, PERRP & Federal OSHA: What Employers Must Know

Private-sector employers in Ohio fall under federal OSHA jurisdiction — there is no OSHA-approved State Plan covering private industry in Ohio. Standards under 29 CFR 1910 Subpart S (general industry) and 29 CFR 1926 Subpart K (construction) apply as they do in any federal-OSHA state.

Ohio separately administers the Public Employment Risk Reduction Program (PERRP), which extends OSHA-equivalent protections to state and local government employees, who are otherwise excluded from federal OSHA coverage. Employers with mixed public/private workforces, or contractors performing work on public infrastructure, should confirm which framework applies to a given site.

Whether a facility falls under federal OSHA or PERRP, 2027 NFPA 70E remains the consensus standard both frameworks reference when evaluating arc flash protection, energized work permits, and electrical safe work practices — from Columbus-region data center construction to legacy manufacturing plants statewide.

Federal OSHA

Private-Sector Jurisdiction

Ohio PERRP

Public-Sector Employees Only

2027 NFPA 70E

Recognized Industry Standard

Energized Work Permit Required

For Live Electrical Work

Training Formats

Choose the Right Program for Your Workforce

Both formats are available onsite at your facility or virtually via Zoom or Microsoft Teams. All sessions are led live by a Certified Safety Professional.

Most Comprehensive

Intensive Qualified Electrical Worker with Examination

Full 2027 NFPA 70E curriculum covering the 2027 NFPA 70E classroom training requirements for electrical workers in manufacturing, data center, utility, and industrial facilities.

Complete 2027 NFPA 70E standard coverage
Hazard identification and risk assessment methodology
Arc flash incident energy and PPE category selection
Arc flash study interpretation and label reading
Energized electrical work permits
Lockout/tagout and electrical safe work practices
Group exercises and scenario-based application
OSHA 29 CFR 1910 Subpart S and 1926 Subpart K coverage

Maximum 20 participants per session

Best for: Initial qualification or triennial retraining of electrical workers in manufacturing, data center, and industrial settings.

Request a Quote

Core Qualification

8-Hour — Qualified Electrical Worker (QEW)

The core qualification course for electricians, maintenance personnel, and technicians who work on or near energized equipment at 50 volts or more — covering hazard identification, PPE selection, and safe work practices in a single working day.

Shock and arc flash hazard identification and risk assessment
PPE selection using the 2027 NFPA 70E tables
Establishing an electrically safe work condition
Energized electrical work permits
Test instrument use and verification
Lockout/tagout and OSHA 1910/1926 requirements
Scenario-based application exercises

Maximum 20 participants per session

Best for: Initial qualification of electricians, maintenance technicians, and other workers who perform hands-on electrical work.

Request a Quote

Refresher

4-Hour — QEW Refresher

Condensed review for workers with prior 2027 NFPA 70E training, covering 2027 edition changes, regulatory updates, and reinforcement of core electrical safety practices.

2027 NFPA 70E edition changes and updates
Regulatory changes affecting Ohio employers
Risk assessment and PPE selection review
Energized work permit requirements
Incident energy analysis refresher
Group discussion and scenario review

Maximum 20 participants per session

Best for: Annual compliance refreshers at manufacturing plants, data center campuses, and utility operations statewide.

Request a Quote

Awareness

4-Hour — Electrical Safety Awareness

Hazard recognition and boundary awareness for employees who work near — but never on — energized electrical equipment: operators, general maintenance, facilities staff, and other personnel who need to understand the risk without performing electrical work themselves.

Arc flash and shock hazard awareness
Recognizing energized equipment and warning labels
Approach boundaries — what they mean and why they matter
Unqualified worker limitations under 2027 NFPA 70E
Lockout/tagout awareness — what to expect and never bypass
When and how to report electrical hazards

Maximum 20 participants per session

Best for: Operators, facilities staff, and other unqualified personnel who work near energized equipment but do not perform electrical work.

Request a Quote

Common Questions About Ohio 2027 NFPA 70E Training

Answers to the questions Ohio safety managers and EHS directors ask most often.

What’s new in the 2027 edition of NFPA 70E?

The 2027 edition — in effect since May 6, 2026 — tightens several requirements employers should know about. Highlights include a new requirement for an additional person trained in emergency response whenever the energized work permit calls for shock or arc flash PPE, a stronger expectation that the emergency response plan is settled before a panel is ever opened, job briefings that cover the specific task’s hazards and required PPE, and a management-of-change expectation that incident-energy analyses are reviewed whenever the electrical system changes — not just on a fixed calendar. Every class we teach is built on the 2027 edition.

Does Ohio’s PERRP program change our electrical safety training requirements?

PERRP extends OSHA-equivalent coverage to Ohio state and local government employees, who are otherwise excluded from federal OSHA jurisdiction. Private-sector employers remain under federal OSHA. In both cases, 2027 NFPA 70E is the standard referenced for arc flash and electrical safe work practices — but employers with public-sector workforces or public infrastructure contracts should confirm with counsel which framework governs a specific site.

Can training be delivered onsite at our Columbus-area data center or manufacturing facility?

Yes. We routinely deliver training at data center campuses, manufacturing plants, and utility facilities across Columbus, Cleveland, Cincinnati, and Toledo. We build the curriculum around your facility’s specific equipment, hazard categories, and PPE inventory.

How many participants per session?

We cap all sessions at 20 participants to ensure every worker receives individual attention and meaningful engagement with the material. Smaller group sizes produce measurably better outcomes — reflected in our 9.46/10 participant rating. If your workforce requires training for more than 20 workers, we schedule additional sessions at your facility rather than exceeding the cap.

Start here

2027 Guide

Look it up · tools

For your company

By industry

By state

Reference

Network

2027 NFPA 70E Training forOhio’s Data Center & Semiconductor Boom

Training Built for Ohio’s Most Demanding Electrical Environments

Oil & Gas Operations

Petrochemical & Refining

Construction & Utilities

Municipalities & Public Utilities

Data Centers

Manufacturing

Ohio, PERRP & Federal OSHA: What Employers Must Know

We Deliver Arc Flash Training Across Ohio

Choose the Right Program for Your Workforce

Intensive Qualified Electrical Worker with Examination

8-Hour — Qualified Electrical Worker (QEW)

4-Hour — QEW Refresher

4-Hour — Electrical Safety Awareness

Upcoming Open-Enrollment 2027 NFPA 70E Classes in Ohio

Common Questions About Ohio 2027 NFPA 70E Training

What’s new in the 2027 edition of NFPA 70E?

Does Ohio’s PERRP program change our electrical safety training requirements?

Can training be delivered onsite at our Columbus-area data center or manufacturing facility?

How many participants per session?

Schedule 2027 NFPA 70E Training for Your Ohio Facility

2027 NFPA 70E Training for
Ohio’s Data Center & Semiconductor Boom